Struktura in navodila za uporabo lepljive preproge
Sticky Mat ima dejansko 32 slojev, od katerih ima 30 nalepko številke 1-30 ali 30-1 na levem ali desnem spodnjem kotu za enostavno zamenjavo . Prva plast je sestavljena iz ne-glue PE pregledni film + 29 plasti z glino PE (ponavadi nebo, ki je običajno) glued double-sided PE sky blue protective film. The first layer of the double-sided film is sky blue with a number label of 30 or 1. The second layer is a transparent non-glue PE film. Each of the 29 layers of glued PE film has a number label of 1-29 or 29-1.
Navodila za uporabo lepljivih preprog:
First, tear off the protective layer of the adhesive surface from the opening on the back, then stick it flat on a clean and water-free floor, flatten the sticky mat on the ground with the sole of your shoe, and then tear off the protective layer from the opening on the front, and you can use it (if the surface of the film is covered with dust during use, tear off this layer from the opening, so that you can use the next layer of clean film). You can see that the first and third steps are transparent, which is what we call the protective layer. The protective layer is used to protect the cleanliness of the sticky mat before it is used. In addition to the protective layer, each layer will be marked with 1,2,3,4...30 in the corner in order, so that customers can Zamenjajte ga z novo plastjo, ko je ta plast prekrita s prahom .
Naše podjetje ponuja popolne rešitve in odlična podjetja za tehnične storitve za uporabnike . Glavni izdelki so oblačila brez prahu za zaslone na dotik, antistatična oblačila brez prahu, krpo brez prahu itd. .